The magnet Painting is a paint that turns the walls and supports a magnetic attraction shield, where you can attach sheets, paper blocks, photographs or warnings and post it with small magnetic magnets. The product is not harmful, it does not contain harmful resins. The product has been updated to line Jumbo Paint green, low VOC content and complies with European rules, EU limit value VOC (Directive 2004/42 / EC).
The product is applied with more layers depending on the attractive force which you want to obtain.
The final wall will feature a lightweight crepe type "micaceous effect of modern generation."
Painting magnet is produced in very thick paste and contains special magnets and special metals to promote the magnetic attraction.
The pack of 1.00 kg, covering with a layer approx. 2.5 surface. To obtain a good result apply # 3, even 4 layers of product. Overlap the layers at a distance of 4, 5 hours between one cycle and the next. It is recommended to always keep stirring the product to avoid the deposit of the metal particles on the bottom of the package.
Preparation of the base: Treat the wall and the media with the nostroFondo Base. Alternatively it should be used a top quality acrylic product or a washable water of superior quality. Even better if a special fund for drywall that has a greater plasticizing. Our "base Fund" meets the expectations. Next, apply more layers of painting magnet (3, 4 layers) to obtain a good magnetic surface.
Painted wall with "Painting Magnet" is ready for use after 24 hours.
Painting magnet is dark gray (similar to RAL 7015), if you want to get the colored surface (the layers of paint magnet must be mandatory 4) it is recommended to cover the surface with a layer of washable colored or enamel mural very thin film, to prevent the loss of magnetic attraction, in fact more paint layers overlap, the more loses the attraction force after. (To retrieve the force of attraction in the case of colored're ready to paint overlay can be remedied by using larger / strong magnets). So, if you prefer a change of pace Calamita, it is recommended to increase the thickness / layers of paint magnet.
COLOR: Paint magnet is dark gray RAL 7015
USE: mix well before use, the metal particles tend to settle, turn the mixture.
DILUTION: dilute the product to max 5% with drinkable water. To obtain the most homogeneous surface, apply with a roller.
average thickness of the dried film: Approximately 120.150 microns per layer
Painting magnet contains at most 100 g / l VOC. Dilution: first coat diluted 5% Drying time: dry to touch 1 hour, Recoatable 6 hours, Yield liter 5 m2 a layer Tools cleaning: with water immediately after use Application: roller recommended eraser roller, brush, spray find the appropriate technical conditions. Kg. 1 Yield Kg. 2 Yield Kg. 6 Yield Kg. 18 Yield 2.5 m2 a layer 5.0 m2 a layer 15.0 m2 a layer 45,0 m2 a layer Painting Magnet color: standard color is RAL 7015. Painting Magnet E 'can change tone, applying a coat of paint or washable wall glaze. The magnetic paint layering if you want to change the tone is 4 layers. NB. La Calamita wall is a desired tone with washable wall or enamel is not writable because the magnet wall stratification has a crepe, then creates problems for accession of chalk and then the cleaning of the support. APPLICATION ON PLASTERBOARD: on plasterboard supports if not properly treated can create staining problems surface. It is advisable to apply in advance on the support plasterboard two coats of Base Fund. APPLICATION ON THE WALL: on supports properly treated masonry, stucco and smooth, apply a base fund. APPLICATION ON WOOD AND MDF: on wooden substrates, suitably treated and stucco, apply a layer of "primer" APPLICATION ON PLATES AND METALS: on metal supports, properly treated and stucco, apply a plasticizer anticorrosion paint. A.M. s.r.l.s. COLOURS is an authorized dealer of the brand Painting blackboard 100% original made in ItalyPainting magnet contains at most 100 g / l VOC. Dilution: first coat diluted 5% Drying time: dry to touch 1 hour, Recoatable 6 hours, Yield liter 5 m2 a layer Tools cleaning: with water immediately after use Application: roller recommended eraser roller, brush, spray find the appropriate technical conditions. Kg. 1 Yield Kg. 2 Yield Kg. 6 Yield Kg. 18 Yield 2.5 m2 a layer 5.0 m2 a layer 15.0 m2 a layer 45,0 m2 a layer Painting Magnet color: standard color is RAL 7015. Painting Magnet E 'can change tone, applying a coat of paint or washable wall glaze. The magnetic paint layering if you want to change the tone is 4 layers. NB. La Calamita wall is a desired tone with washable wall or enamel is not writable because the magnet wall stratification has a crepe, then creates problems for accession of chalk and then the cleaning of the support. APPLICATION ON PLASTERBOARD: on plasterboard supports if not properly treated can create staining problems surface. It is advisable to apply in advance on the support plasterboard two coats of Base Fund. APPLICATION ON THE WALL: on supports properly treated masonry, stucco and smooth, apply a base fund. APPLICATION ON WOOD AND MDF: on wooden substrates, suitably treated and stucco, apply a layer of "primer" APPLICATION ON PLATES AND METALS: on metal supports, properly treated and stucco, apply a plasticizer anticorrosion paint. A.M. s.r.l.s. COLOURS is an authorized dealer of the brand Painting blackboard 100% original made in Italy
