Your colors in time for a coffee
Your basket is empty.
Categories Paints Oikos Ultrasaten opaque
Ultrasaten opaque
can be shipped within 7 days
ULTRASATEN
technical qualities
ULTRASATEN is an enamel acrylic wall eco-effect satin, gloss or matt, self-expanding, scratch resistant, abrasion resistant, low absorption. Thanks to its special composition, provides high coverage with low thickness, high yield and maximum resistance to yellowing, the dirtiness, alkali (ammonia solutions and sodium), alcohols and detergents, chemicals, easy to clean , smacchiabile, is ideal for public places such as schools, hospitals, offices etc. Mixing it with BIAMAX can also be used to obtain valuable decorative effects to sandblasted. High quality product undergoes all the tests indicated by the UNI 11021: 2002? Products and systems for painting rooms containing foods. A low odor, non-flammable, and environmentally friendly.
Areas of application
Interior walls to be decorated, subject to heavy wear or dirt, or as a primer for decorative products.
Surface preparation
Clean the surface, removing any loose or flaking. In the case of very absorbent or friable apply the acrylic fixative CRILUX or NEOFIX by OIKOS. Wait at least 6 hours before painting. To increase the coverage of the cycle use as primer IL PIGMENTATO by OIKOS. If the decoration requires a smooth shave with PASTE FOR WALLS by OIKOS.
Methods of application
Apply two coats of ULTRASATEN of 4 to 6 hours apart, diluting both hands with a 20 to 25% of drinking water. ULTRASATEN can be applied by brush, roller or spray. It is a self-expanding product that does not leave signs of roller or brush strokes. Adding to 4 liters of Ultrasaten (Polished; Satin, Matte), a liter of 03 basis BIAMAX TR results in a mixture with which you can create decorative effects: Frosted Effect: on a smooth surface applied with a brush or brush irregularly a hand mixture ULTRASATEN / BIAMAX diluted to 20-25% with water. After a few minutes wipe with dry brush to highlight processing. If the hedge is not enough, you can apply a second coat after 4-6 hours. The yield varies depending on the amount of product applied.
Yield 9-10mq / l
This finish can obtain? Stellato effect, adding two packs of Decorglitter per liter of the mixture generated.
The effect Textures: on a smooth surface to apply one coat of Fund Murals. After drying, apply with a coating mixture ULTRASATEN / BIAMAX diluted to 15% with water, taking care to make the last step in the horizontal direction, immediately work surface by dragging the Buffer Millerighe (art. 133) in the same direction. To eliminate any imperfections due to accumulations of product wipe the surface with a spatula before drying Crinkle (art.A01). After drying repeat applying the product always horizontally but working it with Buffer Millerighe vertically using the notched trowel to remove any imperfections. It is recommended to download the swab Millerighe often to avoid the formation of lumps. Yield 4-5mq / l.
To this finish is possible to obtain the effect Stellato, adding a pack of Decorglitter for each liter of the mixture generated.
These effects can be used as a basis for the application of other decorative products Oikos
further expanding the range of decorations achievable. In this case it is advisable to mix
BIAMAX with ULTRASATEN version MATT.
Finishes and protective
MULTIDECOR, VELDECOR by OIKOS.
Technical characteristics:? Application
Dilution: 20 ÷ 25% with drinkable water, Le Trame 15%
Yield: 9 ÷ 11 m² / l in two coats, Le Trame 4 ÷ 5 m² / l, Sandblasted 9 ÷ 10 m² / l
Application tools: Brush, roller or spray gun (1.7 mm nozzle), Buffer Millerighe
Fixatives: CRILUX, NEOFIX, IL PIGMENTATO by OIKOS
Application temperature: + 05 ° C to + 36 ° C (with relative humidity not exceeding 80%)
Tack free time: 1 to 1.30 hours (temperature = 20 ° C with relative humidity at 75%)
Drying time: 4 days (temperature = 20 ° C with relative humidity at 75%)
Technical characteristics: the product
Composition: Acrylic resins in water dispersion with organic pigments, inorganic additives aimed at helping application and film formation.
Specific gravity: Polished: 1.24; Satin: 1.3; Matt: 1.37 kg / l +/- 3% (White)
PH: 8 ÷ 9.5
Viscosity: 10,000 ÷ 20,000 +/- 5% CPS Brookfield (RVT 20 rpm / min. At 25 ° C)
Storage temperature: + 2 ° C to + 36 ° C. Protect from frost
Reaction to fire Negative if the product is applied on a non-flammable; material with a thickness of less than 0.600 mm
Water vapor permeability Sd: Polished = 1.9 m. Satin = 1.7 m. Opaque = 1.2 m (max allowed limit 2 m DIN 52 615)
Resistance to washing: Class 1 (UNI EN ISO 11998: 2006)
In compliance with DIN 53 778, resistant at least 1,000 abrasive cycles.
Abrasion resistance: In compliance with DIN 53 778, resistant to more than 5,000 abrasive cycles, more than 60,000 brush strokes
Cleaning effect: In compliance with DIN 53 778: paint coat free from dirt with less than 800 abrasive cycles.
Emission limits of Volatile Organic Compounds (VOC) according to directive 2004/42 / EC: Classification: Satin / Matte: A / a; VOC: 28 g / l (maximum);
Limit Phase I (dal1.1.2007): 75 g / l, Limit Phase II (from 1.1.2010): 30 g / l.
Polished: A / b; VOC: 80 g / l (maximum);
Limit Phase I (from 1.1.2007): 150 g / l, Limit Phase II (from 1.1.2010): 100 g / l
Color: White + shade card
Ultrasaten opaque - AM Colori SHOP