SurfaPore F
1 liter .

SurfaPore F contains a resin moderately stiff that improves paint adhesion . The resin creates a protective layer on the fibrous substrate , and nano particles repel water and oil stains .

SurfaPore F is designed to withstand humid environments and adverse weather conditions . The gypsum plasterboards are very sensitive to moisture which leads to the formation of mold . The panels treated with SurfaPore FnOn absorb moisture as normal ones and can therefore be installed in the vicinity of bathrooms or kitchens . With the application of SurfaPore F the paint can be applied directly on the surface without the need for an additional primer specific . In addition, panels pre-treated can be transported and installed without the danger that the rain can swell or deform them . SurfaPore F can be applied directly on the plaster of plaster . Alternatively , SurfaPore F can be applied on wood fiber composite substrates , such as plywood or chipboard , increasing their life and eliminating the negative effects of moisture. Used as a primer reduces the amount of painting. Prevents swelling of your surface is ideal of bathrooms, kitchens and spas .

Fields of application and characteristics


Protects from water and oil, the fibrous surfaces that absorb
Waterproof drywall
Can be used as a primer
Protects the wood fiber panels ( plywood , chipboard ) , cardboard and wrapping paper / li >
prevents deformation
Avoid bulges
Notes of use

Surface application : The application surface should be dry and clean . Apply SurfaPore F using a brush or roller. Dilution is not required . On very absorbent surfaces reapply within 3 hours . Maximum effectiveness of protection is achieved after 24 hours application .

yield

estimated yield 8-10m² / L , strongly dependent on the properties of the surface applied .