Your colors in time for a coffee
Your basket is empty.
Promotional products Isolterm
Isolterm
Painting breathable thermal condensation on glass microspheres.
Main features: Isolterm is a paint thermal condensation, based on aqueous emulsion resins, titanium dioxide, selected aggregates, hollow glass microspheres, anti-mildew additives. Particularly suitable for local high presence of steam as bathrooms, kitchens, laundries, where easier is the formation of surface condensation and mold. The effective action insulation reduces condensation typical of the perimeter walls improving liveability and reducing the likelihood of mold appear.
Classification (UNI 8681) B4. C.O.A.2.FB
Layer paint finish in water dispersion, single-component, physically drying, matt, acrilstirenica.
VOC Classification (Directive 2004/42 / EC) Interior matt walls and ceilings indoors. EU limit value for Isolterm (Cat. A / a): 30 g / L (2010). Isolterm contains maximum 30 g / L VOC.
Instructions for use and preparation:
Never painted wall surfaces: brush thoroughly, removing all traces of dust, dirt, or pieces of loose plaster. If present mold and / or algae should be treated with Micosteryl 2. Apply a coat of fixative Acrylic all'Acqua Superconcentrated and wait 24 hours.
Walls painted or partially degraded: remove all traces of paint are not perfectly adherent and efflorescence; in case of mold be treated with Micosteryl 2.
Carefully clean off any dust or dirt; check that the wall is completely dry, or possibly even fill with Stuccotone in powder or paste and sand. Attach the entire surface with a coat of acrylic fixative to Water Superconcentrated and wait 24 hours.
application:
Isolterm can be applied by brush or roller. First hand, dilute up to 25% with water.
Thrift, dilute up to 25% with water. Distancing the two hands of at least 12 hours. Wash tools with water immediately after use.
Practical tips · Consumption indicated guarantee a good result in average situations. After drying the surface where you applied the paint should be considerably warmer to the touch compared to how it was before? Intervention. And 'possible to overcoat other hand, over the two recommended, to further increase the effects. If the results were not satisfactory may need to revisit the thermal insulation of the wall and / or provide a suitable air exchange with air holes, dehumidifiers, etc..
· Operating temperature: + 5 ° C to + 35 ° C
· Apply funds seasoned and dry.
· Keep the product in its original packaging in temperatures between + 5 ° C and + 30ºC.
Safety precautions · For safety precautions refer to the MSDS.
· The information for? Is contained in the relevant safety sheet.
· Empty containers, or with traces of dried product film must be disposed of according to local regulations.
· Does not require labeling (DL # 52 of 97 02/19/03 and subsequent amendments and additions).
Isolterm - AM Colori SHOP