Breathable water paint for interiors characterized by an excellent whiteness, high coverage and high yield.
Classification COV (Directive 2004/42/CE) Matt coatings for interior walls and ceilings. EU limit value for HYDRA 50 (Cat. A / a): 30 g / L (2010). HYDRA 50 contains a maximum of 30 g / L VOC.
application Cycle WALLS UNPAINTED (new cured plaster, pre-fabricated panels, new gypsum)
Make sure the surface is thoroughly dried and aged. Brush down to remove dust and fragments of loose plaster. Level the imperfections (holes, cracks or crazing) using STUCCOTONE paste or powder, operating smoothing afterwards. After 2-6 hours then, sand repair areas and clean thoroughly.
In most cases, apply a coat of FISSATIVO ACRYLIC WATER SUPERCONCENTRATO, after 4-6 hours, apply at least two coats of HYDRA 50. In the case of new gypsum and loose surfaces, always apply a coat of FISSATIVO ACRYLIC WATER SUPER CONCENTRATE.
INTERNAL WALLS PAINTED WITH PAINT TOUGHENED
Carefully clean the surface from dust or dirt and any imperfections, sand and dust. In the case of tempera paint chalking, proceed to the removal of the film. Insulate the entire surface with a coat of FISSATIVO ACRYLIC WATER SUPERCONCENTRATO. After 4-6 hours, apply at least two coats of HYDRA 50.
INTERNAL WALLS PAINTED WITH WASHABLE PAINTS
Clean the surface carefully, any imperfections, sand and dust. If grout isolate the filled parts with a coat of FISSATIVO ACRYLIC WATER SUPERCONCENTRATO, after 4-6 hours, apply at least two coats of HYDRA 50.
practical advice Environmental and surface conditions:
temperature: min. + 5 ° C / max. + 35 ° C;
relative humidity: <80%;
substrate temperature: min. + 5 ° C / max. + 35 ° C;
surface humidity: <10 of R.H.
Wash tools with water immediately after use
Safety Precautions Store in tightly closed and protected from frost.
Safety information for the user is given in the relevant safety sheet.
Empty containers, or with traces of dried product film must be disposed of according to local regulations.