Your colors in time for a coffee
Your basket is empty.
Categories Paints Baldini Vernici Holz Lack flatting overglaze water
Name HOLZ LACK overglaze ALL? WATER
Description Paint colorless gloss or satin component water.
Key features Scratch-proof, shock-resistant, with excellent elasticity. And 'waterproof and resistant to detergents and alcohol. Can be washed with water and non-abrasive detergents and polished with the normal waxes for wood. Available in polished and satin. The maximum hardness is reached after 7 days of application. This product qualifies for the EU eco-label because: helps to reduce water pollution and air pollution and waste
Baldini Technicolor Classification (UNI 8681) A4.C.0.A0.FA Paint for the topcoat in aqueous dispersion, moncomponente, physically drying, glossy, acrylic.
VOC Classification (Directive 2004/42 / EC) paints and wood stains for interior / exterior trim. EU limit value for Holz Lack Flatting vitrification (Cat. A / e): 130 g / L (2010). Holz Lack Flatting vitrification contains maximum 50 g / L VOC.
Application cycle Apply the product directly on the wood so abundant, making sure to spread it evenly crossing his hands first horizontally and then vertically. We recommend using a brush with soft bristles to long hair or short hair roller.
New wood: smooth the surface with a special machine to remove the hair of the wood. Remove dust with vacuum cleaners. Proceed to paint applying minimum 2 coats. The number of coats to be applied is a function of the fullness to be obtained. On porous wood may be needed three hands. Painted wood: sand the surface with sandpaper 250 - 320. Wash with water and detergent and rinse with water several times to remove all the dust created by the sanding. Allow to dry. Proceed to apply 2 coats of flatting vitrification.
Practical advice Shake well before use.
Environmental and surface conditions: The surface must be dry, free of dust, grease and any other polluting substance.
Temperature the enviroment: min. + 10 ° C / max. + 35 ° C
Relative humidity of? Environment: <75%
Substrate temperature: min. + 10 ° C / max. + 35 ° C
Cleaning of tools: Clean used tool eliminating the greatest possible amount of paint leveraging repeatedly on the inside edge of the jar. Do not use running water. Plunge in a minimum amount of water.
Safety precautions · Close the jar immediately after use. Keep tightly closed, away from heat, frost and direct sunlight.
· Does not require labeling Safety (DL # 52 of 02/03/97 and subsequent amendments and additions).
· The information is contained in the relevant safety sheet.
· Empty containers, or with traces of dried product film must be disposed of according to local regulations.
Holz Lack flatting overglaze water - AM Colori SHOP