ENCANTO

Technical qualities

ENCANTO is a special decorative painting water with its metallic color accents, its ease of application, the shades depending on the light creates precious reflections, seals the union between antique techniques and modern product giving the surroundings a charming and valuable is difficult to obtain with a normal paint. Easy to make is applied by brush in a very simple and quick no problems of joints. Due to its composition, the product can be used indoors and gives the wall beautiful sheer effects or intense colors with precious metallic reflections. With Encanto antique art, modern design, fashion, as if by magic come together in one product with a magical effect on the walls made of metallic color accents. ENCANTO is breathable, low odor, non-flammable and environmentally friendly.

Application areas

Decoration of interior surfaces.

Surface preparation

New surfaces should be thoroughly dry. In case of chalking substrates and loosely compacted or old paint not properly anchored to clean and scrape the sides or flaking, then apply a coat of Crilux or Neofix by Oikos. To obtain a smooth surface applied as a base coat 2 coats of Ultrasaten by Oikos Opaque white or, if required, in the specific color shown in the color samples ENCANTO. To obtain a more matte finish, just to colors obtained from bases Silver, Grey and Gold, it is possible to use as bottom product Fondo Murales by Oikos, in one or two hands as required.

Implementing rules


Apply a coat of ENCANTO using the special Brush-Spain by Oikos, crossing the brush strokes until a uniform distribution of the product, immediately wipe with dry brush to make uniform finish. If you want to get a smoother finish and faded you can apply the product in 2 coats, diluted to 20%, waiting 4 hours between one coat and the next. Using the same technique, but using as bottom product Ultrasaten Matt in a contrasting color than the color of ENCANTO chosen as a finish, you can get a finish with metallic accents and special color highlights. The effect is greater blurring further the application of ENCANTO. For the best possible Stellato add Decorglitter by Oikos to Encanto. Besides the classical finish you can get more decorative effects by changing the combination of colors or the tool used for machining:

- Technique to glove Sponge: On smooth, apply as primer Ultrasaten Matt. After applying ENCANTO with the traditional technique and have waited for his drying can be applied Imperium by Oikos diluted 10-15% by dabbing the surface with the use of the glove Sponge (art.115) to achieve a metallic effect, high performance. To achieve a starry add Decorglitter by Oikos to Imperium.

Yield: ENCANTO 6-8 m / s, Imperium 12 -14 m / s

- Technique to buffer Millerighe: On smooth, apply as primer Ultrasaten Matt. ENCANTO Apply undiluted in a vertical or horizontal brush and work in the same direction with the use of buffer Millerighe (art. 133). On this surface you can apply Imperium by Oikos, diluted to 25%, with roller for Enamels (Art. A04) taking care to make a last step to roll around in the same direction to remove any imperfections and get a metallic effect, high performance . For the best possible Stellato add Decorglitter to Imperium.

Yield: ENCANTO 6-8 m / s, Imperium 12-13 sq m / l

- Technique to buffer Millerighe (crossover): On smooth, apply as primer Ultrasaten Matt. Apply undiluted ENCANTO horizontally with brush and work in the same direction with the? Use Buffer Millerighe (art. 133). After drying, repeat the application in the vertical direction. On this surface you can apply Imperium by Oikos, diluted to 25%, with roller for Enamels (Art. A04) taking care to make a last step to roll around in the same direction to remove any imperfections and get a metallic effect, high performance . For the best possible Stellato add Decorglitter to Imperium.

Yield: ENCANTO 3-3.5 m / s, Imperium 12-14 sq m / l


- Technical Brush: Apply as a primer BIAMAX 03 or 07 strokes with crossed to get an antique effect. Applying ENCANTO diluted to 15-20% with the same technique you can donate to the surface an antique effect with iridescent reflections. For the best possible Stellato add Decorglitter by Oikos to Encanto.

Yield: 03 BIAMAX 4-4.5 m / s, 07 BIAMAX 3.5-4 m / s ENCANTO 6-9

Finishing and protective

To further protect ENCANTO wear and aging, apply the special transparent protective varnish WATINS LUX or IGROLUX by Oikos. To achieve a finish with brilliant hues can be mixed to the protective additive DECORGLITTER by Oikos.

Technical characteristics: the application

Dilution: 5-20% with water depending on the processing

Yield: 69 m2 / l according to? Support absorption and lavorzione

Application tools: Brush-Spain by Oikos

Fixatives: CRILUX or NEOFIX by Oikos

Funds: FUND MURALES or ULTRASATEN MATT by Oikos

Application temperature: 10 ° C + 36 ° C (with a relative humidity up to? 80%)

Drying time to touch: 1 h (temperature = 20 ° C with relative humidity at 75%)

Drying time washing: 7 days (temperature = 20 ° C with relative humidity at 75%)

Tools cleaning Water

Technical characteristics: the product

Composition: Acrylic copolymers in water dispersion, special effect pigments, selected fillers and additives to aid application

Specific weight: 0.9 kg / l +/- 3%

PH: 6 ¸ 7

Viscosity: 10,000 ¸ 15,000 CPS Brookfield (RVT 20giri / min.a 25 ° C)

Storage temperature: + 2 ° C to + 36 ° C. Protect from frost

Reaction to fire Negative if the product is applied on a non inflammable; material with a thickness of less than 0.600 mm

Water vapor permeability Sd High: Sd 0,008 m (UNI EN ISO 7783-2: 2001)

Resistance to washing: Class 3 (UNI EN ISO 11998: 2003)

Emission limits of Volatile Organic Compounds (VOC) according to directive 2004/42 / EC: Classification: Classification: A / l; VOC: 40 g / l (maximum); Limit Phase I (from 1.1.2007): 300 g / l, Limit Phase II (from 1.1.2010): 200 g / l

Color: Shade card

Packaging: Lt.1 - 4 - 5